Why is Synthetic Oil Better for Water Well Drilling Rigs?

Why is synthetic oil better for water well drilling rigs? This topic has become more important to understand as the economy becomes more challenging and water well drilling operations need to watch their bottom line when trying to optimize profits. Keeping water well drilling rigs operating efficiently and reliably without downtime is essential.

How Do Water Well Drilling Rigs Function?

Water well drilling rigs are huge pieces of equipment that are delivered to a site by large vehicles and then set up and constructed at the job site so that water wells can be drilled/dug. There are two types of water well drilling rigs. The first is what is called a pounder, which raises and then lowers a heavyweight in a process that is known as cable drilling that punches holes in the ground. The other type of water well drilling rig utilizes what are known as rotary drillers, which drill down into the dirt using a circular motion.

Water well drilling rigs on a rotary drill utilize a variety of bits. The two most basic types of rotary bits are called the interlocking steel bits and long cable bits. These two types of bits turn in a clockwise direction to drill or bore into the earth, which then loosens the dirt. Pieces of rock are brought up to the surface as the rotary bit rotates. As the rotary bit drills into the earth, the heat starts to be generated, so to keep the drill bits cool, water or mud needs to be utilized.

The object to drilling a water well is to find an aquifer, which is a water source usually found deep below the ground. Once an aquifer is found, the drilling continues further down so as to be sure that the supply of water is productive enough to provide a constant long-term source of drinkable water. Typically, bedrock water wells are usually bored down to anywhere from 100 to up to 500 feet down. After the well has been dug, then well casings are installed.

Keeping water well drilling rigs and ancillary equipment running reliably and without downtime is absolutely imperative. Some thought needs to be applied when analyzing whether the well driller’s fleet of equipment is being maintained in the absolutely optimal way or could there be some improvements implemented that could enhance the performance of the equipment and importantly reduce maintenance and repair costs? One obvious aspect to look into is the lubrication program that is being utilized. Are the best possible lubricants being used?

There is always a better way and there are always possibilities for improvement. With that in mind, why is synthetic oil better for water well drilling rigs?

AMSOIL Synthetic Water-Resistant Grease

It goes without saying that certain parts of water well drilling rigs are exposed to an inordinate amount of moisture and water. Protecting critical components that must operate continuously within a high moisture environment requires specialized lubricants. AMSOIL Synthetic Water-Resistant Grease was specifically engineered to be highly resistant to water 2washout and provides superior spray-off protection.

  • Outstanding rust and corrosion protection
  • Protects metal from sudden extreme pressure loads
  • Reduces friction and wear
  • Excellent adhesive and cohesive properties
  • Clings to metal when exposed to water
  • Amazing resistance to water washout
AMSOIL Synthetic Water Resistant Grease.
AMSOIL Synthetic Water Resistant Grease


  • Superior protection against wear even in the presence of 15% water contamination
  • Outstanding protection against corrosion and rust
  • Reduces friction and wear
  • Reduces foaming and lower operating temperatures
  • Excellent thermal runaway control
  • Extends gear, oil, and seal life
AMSOIL SEVERE GEAR® Synthetic Gear Oil 75W-90.
AMSOIL SEVERE GEAR® Synthetic Gear Oil 75W-90

AMSOIL Signature Series Max-Duty Synthetic Diesel Oil 5W-30

  • Provides 6 times more wear protection
  • Superior extreme pressure protection
  • Outstanding viscosity protection
  • Minimizes and lower oil consumption
  • Improves fuel mileage efficiency
  • High viscosity index for superior extreme-temperature performance
AMSOIL Signature Series Max-Duty Synthetic Diesel Oil 5W-30.
AMSOIL Signature Series Max-Duty Synthetic Diesel Oil 5W-30

AMSOIL Diesel Injector Clean + Cetane Boost

  • Up to 8 points increase of cetane
  • Up to 8% better fuel economy
  • Provides maximum power and efficiency
  • Superior cleaning of dirty injectors
  • Reduce wear in injectors and pumps
  • Longer life for fuel filters
  • Guards against rust and corrosion within fuel systems
  • Free of alcohol
  • Engineered for all diesel fuel, including biodiesel
AMSOIL Diesel Injector Clean + Cetane Boost.
AMSOIL Diesel Injector Clean + Cetane Boost

We’ve outlined why is synthetic oil better for water well drilling rigs. With this information, hopefully, you’ll be able to decide whether your fleet of water well drilling rigs can benefit from AMSOIL Synthetic Oil. By switching to AMSOIL your operation can save time and money. For 48 years AMSOIL has proven to help water well drilling rigs reduce downtime and save on repair and maintenance costs. You can benefit today!

2 thoughts on “Why is Synthetic Oil Better for Water Well Drilling Rigs?”

  1. It’s good to know that water wells typically range from a depth of 100 to 500 feet. My aunt and uncle are interested in having a water well drilled for their home to pursue a sustainable, off-the-grid lifestyle. I’ll share this info to give them a better understanding of the basic process for drilling a water well!

Leave a Comment

Your email address will not be published.